Skip to product information

NEW PRODUCT🚨 | LOW STOCK📦

RoadGlow™ Dynamic Emblem Display

RoadGlow™ Dynamic Emblem Display

🎨 Upload Your Own Designs


📱 App-Controlled Images & Animations


💧 IP67 Weather-Resistant Housing


🔧 Direct-Fit 74 mm / 82 mm Options

Get it between - and -.

  • American Express
  • Apple Pay
  • BLIK
  • EPS
  • Google Pay
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
View full details
YOUR CAR 🚘 YOUR GLOW ⚡ IMAGE + VIDEO MODES 🎬 UPLOAD YOUR OWN DESIGN 🎨 74 MM + 82 MM OPTIONS 🔧 BUILT FOR CAR MEETS 🏁
RoadGlow Dynamic Emblem Display

ROADGLOW™ DYNAMIC EMBLEM DISPLAY

ONE EMBLEM.
UNLIMITED LOOKS.

Turn a static badge position into a vivid full-color display for images, emojis and animated effects.

🎨 Custom Designs Upload your own style
👆 Double-Tap Control Switch modes instantly
💧 IP67 Protection Built for exterior use
🔧 74 / 82 mm Two popular sizes
RoadGlow Image Mode and Video Mode

IMAGE + VIDEO MODES

SWITCH THE LOOK.
OWN THE NIGHT.

Move between sharp static graphics and vivid animated modes on a bright full-color circular IPS display.

  • 16.7 million vivid colors
  • Sharp IPS display technology
  • Static image and dynamic video modes
  • Clear visibility day and night
  • Low-power wired connection
Double-tap to switch display modes

DOUBLE-TAP TO SWITCH

Change your mode in seconds

Double-tap the center of the display to cycle through compatible image and video modes.

Weather-resistant RoadGlow emblem display

IP67 PROTECTION

Ready for real-world weather

The sealed display housing is designed to resist everyday dust and rain when correctly installed.

Emoji and graphic modes

A MODE FOR EVERY MOOD

Emojis, graphics and animated looks

Give your build a completely different personality whenever you want to stand out.

Upload your own design through the compatible control app

UPLOAD YOUR OWN DESIGN

Your design. Your display.

On compatible app-enabled versions, choose an image, preview the circular crop and send it directly to the display.

RoadGlow anime display mode installed on a performance car

MADE TO GET NOTICED

FROM DAILY DRIVER
TO SHOW BUILD.

SIZE & COMPATIBILITY

CHOOSE BY MEASUREMENT FIRST

Measure the original emblem across its widest point and select the matching diameter. The vehicle codes below are a guide and do not replace measuring your exact hood or trunk position.

74 MM

Usually Rear / Trunk

Common applications: E46 Sedan/Coupe, E90 Sedan, F22/F23, F30 Sedan, F32, F33, F36, F80, F83 and F87.

Selected rear applications: G20, G30, F90 and G32. Measurement required.

Not the standard rear fit for E46 Convertible/Wagon or E91/E92/E93 models.

82 MM

Usually Front / Hood

Supplier-listed applications: E30, E36, E39, E46, E60, E87, E90, E91, E92, F10, F20, F30, G20, G30 and X1.

Also common on selected positions: E21, E28, E34, E38, E53, E61, E70, E82/E88 and selected X-series models.

Mounting pins, curvature and cable access can differ even when the diameter matches.

Before ordering: confirm the diameter, hood or trunk position, mounting-pin spacing and a safe route for the supplied cable. If unsure, send your model, year, installation position and a photo to support.

HOW TO INSTALL

FIVE CLEAN STEPS

Installation difficulty varies between vehicles. Electrical work should be completed by a qualified automotive installer.

Measure the original emblem
01

Measure First

Measure the widest outside diameter. Choose 74 mm or 82 mm only after checking your exact mounting position.

Disconnect vehicle power
02

Disconnect Power

Switch off the ignition and disconnect the negative battery terminal before touching vehicle wiring.

Remove the original emblem
03

Remove the Old Emblem

Protect the paint and lift the original piece evenly using plastic trim tools.

Route and connect the supplied cable
04

Route & Connect

Pass the cable through an existing protected opening and connect the supplied wiring according to its manual.

Mount and test the display
05

Mount, Pair & Glow

Seat the display evenly, reconnect power and test every supported mode before driving.

Professional installation recommended. Vehicle wiring, sealing and cable routing differ between platforms. Follow the supplied instructions for your exact production version.

WHAT'S INCLUDED

READY FOR THE UPGRADE

Dynamic Emblem Display
Connection Components
📱 Compatible Control Access
🛠 Installation Components

Package contents, connector style and available control features may vary between production versions.

ROADGLOW VS. A STATIC EMBLEM

ONE DISPLAY. MORE POSSIBILITIES.

ROADGLOW STATIC EMBLEM
Changeable designs
Animated content
Image and video modes
Full-color IPS screen
Weather-resistant housing Varies
🔒 Secure Checkout Protected payment
📦 Insured Shipping Tracked delivery
↩️ 30-Day Trial Risk-free returns

NEED TO KNOW

FAQ

How do I choose 74 mm or 82 mm?

Measure the outside diameter at the exact position you want to replace. You should also verify the mounting pins, curvature and cable access.

Can I upload my own design?

Compatible app-enabled versions support custom image selection and preview. Available formats and control features may vary between production versions.

Does it support animations?

The display supports compatible image and dynamic video modes. Available designs depend on the supplied product version.

Will it fit every model listed?

No blanket fitment claim is possible. Body style, model year and front or rear position can use different sizes and mounting structures. Always measure before ordering.

Is it waterproof?

The display housing is advertised with IP67 protection. Correct sealing, connector protection and cable routing are essential.

Does it need charging?

No separate charging is normally required. The display uses a wired, low-power vehicle connection.

Is this an original manufacturer part?

No. This is an aftermarket customization product and is not manufactured, sponsored or endorsed by any vehicle manufacturer.